|
STANDARD PARTS FOR PRESS DIES：
Six Classes, totally over 1800 varieties Back
to Top
Production group: Male die series, female die series …
Guide group: guide rod, guide bushing, seat-group guide assembly
(independent guide rod)…
Elastic components group: steel wire spring series, Polyurethane spring series,
gas spring series… Retaining and connecting group: retaining plate for
male/female mold, retainer, dowel pin, screw…
Material transferring group: Lifting and guiding assembly, material
transferring /guiding components.
Miscellaneous: sling ring, products for EDM application, chemicals…
_________________________________________________________________________________
STANDARD PARTS FOR PLASTIC MOLDS:
Totally
8 Classes Back
to Top
Ejector group: Straight ejector pin series, step ejector pin series,
rectangular ejector pin
molding group: center pin series, straight core pin, one-step,
two-step group core pin,
side action group: angular pin series , locking blocks,
guide slide sseries
sprue/runner series: sprue bushing locating ring series,
runner lock pins series, pin gate series
Guide/locating group: taper pin series, guide pin, guide bushing series.
Close/open control components: Protection plates,
parting locks, tension links
Elastic components: steel wire spring series
Miscellaneous: cooling and temperature-regulating series, ED series
_________________________________________________________________________________
Standard
Parts for Automotive Molds： Back
to Top
1. Pressing elements Production group: Male/female die, Ball-lock
male/female die Retaining and connecting group: retainer, ball-lock
retainer Guide/locating group: die guiding components, die locating
components Material transferring group: loading/unloading components,
material guide/limit/locating components. Other components: sling and
mold protection/storage
components, stretch spring and relevant components, mold structural
components
2. angular cams and slide guide group: angular cams mechanism, slide guider,
reset spring.
3. Elastic components: steel-wire spring series, PU spring series, nitrogen
cylinder series
_________________________________________________________________________________
Carbide Standard Components for Dies： Back
to Top
 |
The first carbide catalog in Chinese mold industry,Carbide Standard Components for Dies Catalog 2007, was published and used formally on Feb 1st, 2007.
With the prosperous development of Chinese mold industry, the requirement of carbide standard components for dies are bigger and bigger, and the demands of high quality also developed. In order to satisfy market requirements and provide customers better service, our company drew up the first carbide catalog in domestic mold industry---. It was published and used formally on Feb 1st, 2007.
This catalog mainly include: punches, button dies, pilot punches, stripper guide posts & bushings, gauges for inspection, plank stuff & steel bar and other components 5270 kinds in total.
We believe that the new catalog of Punch Industry will be widely used in Chinese mold industry and will provide more convenient service for carbide customers.
|
|
Work Types: punch series, button dies series
Guide Types: stripper guide posts & bushings, .pilot punches
Inspect Types: limit gauges, pin gauges, bar gauges
Permanent Connection Types: dowel pins, screws, fixed keys, slotted keys
Material Types: plank stuff, steel bar
|
